 |
| |
Models & Pricing |
|
|
|
HATCH RAIL W/ONE SIDED LADDER GRAB
The HATCH RAIL models with the one-sided ladder grab meet OSHA’s requirement of a minimum 22” opening and give support for entering or exiting the hatch. A self-closing gate and alarm light can be added for more security. |
| Model |
Net Opening |
Ladder Grab |
Shipping Weight |
Pricing |
| 3838-1 |
30" x 30" |
1 side |
63# |
$760.00 |
| 3844-1 |
30" x 36" |
1 side |
68# |
$782.00 |
| 4444-1 |
36" x 36" |
1 side |
68# |
$809.00 |
| 3862-1 |
30" x 54" |
1 side |
75# |
$838.00 |
| 38104-1 |
30" x 96" |
1 side |
95# |
$1033.00 |
| 4456-1 |
36" x 48" |
1 side |
70# |
$838.00 |
| 44104-1 |
36" x 96" |
1 side |
100# |
$1059.00 |
|
 |
HATCH RAIL W/TWO-SIDED LADDER GRAB
Two –Sided Ladder Grab model also allows for the OSHA required minimum 22” clearance for entering or exiting the hatch, and gives support on both sides of the opening. For an additional safety measure, a self-closing gate and alert light can be added. |
| Model |
Net Opening |
Ladder Grab |
Shipping Weight |
Pricing |
| 5656-2 |
48" x 48" |
2 sides |
74# |
$864.00 |
|
 |
HATCH RAIL W/NO LADDER GRAB
Even the most basic model still meets OSHA's requirements for hatch doors left up while on the roof. A self-closing gate and alert light can also be added to these models. |
| Model |
Net Opening |
Ladder Grab |
Shipping Weight |
Pricing |
| 3232-0 |
24" x 24" |
No Grab |
56# |
$723.00 |
| 3238-0 |
24" x 30" |
No Grab |
58# |
$732.00 |
| 3244-0 |
24" x 36" |
No Grab |
60# |
$741.00 |
| 32104-0 |
24" x 96" |
No Grab |
90# |
$1006.00 |
| |
|
 |
SELF-CLOSING GATE
Spring loaded self closing gate with adjustable clamps to install onto exiting 1 5/8" posts. |
| Model |
Net Opening |
Shipping Weight |
Pricing |
| G2436 |
24" to 36" |
12# |
$254.00 |
|
 |
HATCH ALERT LIGHT
The HATCH ALERT is designed to alert personnel that the rooftop hatch door is in the open position. A very bright xenon strobe light emitting 60 double flashes per minute, the light is activated as soon as the hatch door is lifted upward 30 degrees. The strobe automatically turns "OFF" when the hatch is in the closed position.
Mounted on the inside surface of the hatch with its magnetic base, the Hatch Alert fetures a built-in tilt switch that is located in its battery compartment. This switch automatically triggers the strobe to its flashing mode when the hatch is lifted upward. Two D-Cell alkaline batteries provide 50-60 flashing hours. |
| Model |
Shipping Weight |
Pricing |
| G2436 |
1# |
$44.50 |
|
| |
