The KeyCurb Curb Support is the foundation of the KeyCurb products. With a variety of customizable formats, KeyCurb can be utilized in almost all pipe support configurations. The KeyCurb Curb Support is made of molded recyled rubber curb and is 3 1/2" high, 6" wide, 9" long and weighs 5 pounds. Pipe or conduit clamps can be secured to curb with 1 1/4" sheet metal screws. The Curb Support can be used under RoofTop equipment as an isolator and no additional pad is needed.

Why use KeyCurb Pipe Supports on your next job?

Easy take-off: KeyCurbs support pipes ½” to 8” in diameter and over 540 lbs. per 10' spacing.

Quick Installation: KeyCurbs stand alone – no extra pad to install and any adjustment to height is done with a common wrench.

Economical: compared to all other pipe support systems, the KeyCurb offers more versatility and strength for less.

KeyCurb molded recycled rubber bases are safe for use on all roof types without an extra pad or slip sheet and there is no roof penetration!

Approved by major roofing manufacturers, KeyCurbs won’t warp, shift or damage roof membranes. Start with the KeyCurb base and add strut, rollers or clamps to meet your project requirements. Call us for special projects or custom orders.

Pipe Supports can eliminate old tires from landfills.

Did You Know that 41% of the average passenger tire is recyclable natural or synthetic rubber - about 9 lbs.* Each KeyCurb base uses 5 lbs. of this rubber eliminating old tires from landfills one pipe support at a time.

*Rubber Manufacturers Association

Need a pipe support that can be safely adhered to the roof?

Under normal conditions, it isn't necessary to adhere pipe supports to the roof; however, in special circumstances it may be required. KeyCurb bases can be adhered directly to the completed roof surface. The adhesive used depends upon the type of roofing system. All roofing adhesives are compatible with KeyCurbs. Consult with the roofing manufacturer for the recommended adhesive product.